What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 12:24

This is 'the assistant's answer'
But it can get overloaded, and no longer works.
In schematic diagrams this is the symbol for a fuse:
What does a fuse do?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
What do you do when your family doesn’t care about you?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
A fuse is a non-resetable over current circuit protector.
Physicists create 'the world's smallest violin' using nanotechnology - Phys.org
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
I post the exact comment here.
AI Cracks Mars Mystery: 500,000 Streaks Solved Without a Drop of Water - SciTechDaily
Barnstars:
so, what happens?
These are simplified answers to the original question, and does not change anything I wrote above.
(Dc diagram shown, AC is similar).
[image of Common-mode choke]
nine
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
An AC voltage/ current source, and an ac inductive load.
The other is “what does a “fuse” do?”
First Sentence:
At least they know the answer if they wanted it.
What is lightning?
Discover Why These 2025 Milky Way Photos Are Shaking the Astrophotography World - The Daily Galaxy
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Here is a simplified AC power diagram.
2024–10–16 [ OO OLAOYE OYEBODE ]
Satellite measures river flow waves for the first time - The Washington Post
These devices are installed between the “hot” and “neutral” and protective ground.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
One is “what exactly is in a ‘surge protector’ ? ”
Stop Work Orders At NASA JPL - NASA Watch
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Roster rankings: PFF gives an ugly grade to the Browns roster - Dawgs By Nature
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–14 [Omar Gharbi Omar Gharbi ]
but I think this circuit , shows a few more pieces.
For this case there are devices called Metal oxide varistors (MOV).
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Now when you have a certain ac resistance, then a current flows in a loop.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
A circuit breaker is similar, but is resettable.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
the problem then depends on "how fast does the fuse operate?".
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is where this question deviates from being a 'generic' question, and becomes more specific.
It seems Mohan does not understand the difference between a comment and an Answer.
eight
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
So, the voltage could go up to 500 volts, and the fuse will not open up.
But… the neutral is now “floating” because of the 1 ohm resistance.
There are three different concepts here that are getting confused.
but this device (an Inductor) … impedes the rapid changes in the current.
what exactly is a ‘surge’ protector?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is where the MOV conducts again, and dissipated the energy.
At one ohm, the resistor has a maximum of 1 watt power.
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Edit 2024–10.
There are two important concepts here.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
It also is a device that limits the change in current flow.
The bolt then partially travels down the line to your home.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–10–10[John johnson John Johnson ]
He then describes the function of a fuse.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
He then describes Rainy Season and Lightning.
This device then solves the entire problem.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Upvotes:
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This one hit behind the barn.
One
a photo is worth a thousand words.
[old diagram got deleted by accident]
He then asserts :
The third is lightning and “how it gets conducted into a home.”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].